Making Chocolate Using Molds

Making Chocolate Using Molds

These days, you don’t have to go to the grocery to buy chocolate. Just like cookies, these can be home made as long as you have the ingredients and the materials. They most important to make chocolate are the molds.

Molds are usually made of plastic and these can be purchased from craft stores. Most of these cost about a dollar up so if you want to make these in different shapes and sizes, you have to buy a bunch.

Now that you have your mold, you should also buy the raw chocolate which is also available from the craft store. This is available in different flavors and colors so you can mix them up later on.

There are two ways to melt chocolate. The first is to cut the chocolate block into small pieces and then put this in a microwave safe bowl before sticking it in the oven. Since it is quite hard to see if all the chocolate has finally melted, we now come to the second option which is to melt it using a double boiler.

A double boiler consists of two pans. The first one has water while a smaller one is placed on top which is where the chocolate will be placed. You then stir the chocolate until melts. Once everything is now in liquid form, you then get your mold and pour the chocolate.

You should tap the bottom to take out air bubbles out of the chocolate otherwise there will be holes later on when they come out of the freezer. If you decide to put in candy sprinkles or marshmallows with your chocolate, it is best to pour them into the boiler.

After ten minutes or so, the chocolate mold inside the freezer is ready to be taken out. A good indicator is to check the bottom of the mold and see if the chocolate is still holding on to the mold.

If it is ready, then it is time to flip it over and tap it gently so it can land on a soft surface like a napkin to prevent it from breaking. Another method is to carefully pour water on the mold. But if it is not, then you should put the mold back into the freezer.

The nice thing about working with chocolate is that if is should crack or break, you can recycle it which prevents wastage. If you make a mistake when you are painting it, don’t touch it and wait until it freezes so it is easy to remove and you can start over.

When it is ready, you can serve this as part of your dessert but if you are giving this away as a gift, make sure you find a nice box because it should look presentable to whoever will be receiving it.

Surely the molds you used to make chocolate will be used in the future. To maintain it, you must never wash this with soap as this removes its slickness. You should also carefully dry it after washing because it could cause spots to appear making it also difficult for the chocolate to be released from the mold.

But if your chocolate mold is sticky, perhaps you should coat it first lightly with some vegetable oil before you pour in the melted chocolate.

Making chocolate using molds is fun. You may not get it perfect the first time but as time goes by, you are sure to get better at it.